ctlogo.gif (3792 bytes)
CORROSION CONTROL WITH NON-METALLICS
Serving Oklahoma, Kansas, Texas, Missouri, Arkansas, Louisiana, and New Mexico

Phone: 800-652-6789 Fax: 918-446-8812
Home Products Specifications Contact Us
Get Literature Feedback About Cortrol Site Index

Cortrol Home Page
Click to see our Products
Specifications
Contact Cortrol
Request Literature
About Cortrol
Send Us Feedback
Site Index

plant2.gif (2494 bytes)

Representing:

purelogo.jpg (10060 bytes)

valve-1.jpg (23497 bytes)
PureFlex 800 Series Butterfly Valve

Pureflex 800 Series butterfly valve is manufactured from Durcor-62™, PureFlex proprietary advanced fiber reinforced composite. Durcor-62™ reinforcing fibers are long and interlocking, this interlocking reinforcement system transfers loads throughout the fiber matrix, making the800 series valve body virtually indestructible. It has tensile and compressive strengths that rival steel along with outstanding impact resistance that is unmatched in the industry. The strength of Durcor-62™ enables the 800 series valve to maintain ANSI face-to-face dimensions, be direct-threaded for lug design and allows it to be installed in any type of piping system without the need for special considerations. Durcor-62™ excels in temperatures from -60°F to 250°F and has only 0.001" of thermal expansion across its full temperature range.
   

 

flexchm1.jpg (22336 bytes)
FlexChem Series Hoses

Pureflex integrates design, hose and fitting manufacturing, testing and assembly - all under one roof. Add the largest selection of end fittings and it's easy to see why PureFlex is the company of choice for those with demanding tranfer processes.

FlexChem advantages:

  • Corrosion resistant Teflon is fully resistant to the broadest range of industrial chemicals and has a zero corrosion rate and lower life cycle costs.
  • Cleanable Non-stick, low porosity tube does not trap bacteria and can be cleaned with steam, detergents, caustics or solvents.
  • Sanitary FDA-approved materials meet or exceed 3A requirements.
  • Compatible Will not contaminate or impart a taste, color or odor to any media.
  • Flexible The most flexible rubber covered hose in the industry. Does not fatigue or stress corrode like metal hose.
  • Durable Designed for extended use in hostile environments involving severe chemical, thermal, and mechanical stresses. Does not suffer aging or embrittlement, even with extreme thermal cycling.

Available in 1/2" through 6" diameters, and from 100psi to 525psi depending on size.

Hose cover options:

  • Scuff sleeve Protects the hose exterior from damage when dragged over rough surfaces.
  • Fire sleeve Protects hose from extreme exterior temperatures. Used for insulating hose. Protects personnel who handle the hose from extreme interior temperatures.
  • Polyolefin Provides a smooth, cleanable covering over braided hose.
  • Armor guard Protects hose from kinking by not aloowing handler to exceed bend raduis.
  • Spring guard Provides kink resistance and protects hose exterior from scuffing and damage when dragged over rough surfaces.

Over 40 standard fitting styles are manufactured, including: flanged, sanitary, JIC, NPT, cam lock. All fittings feature PureFlex's exclusive high performance blowout-proof barb design.

Ultra-smooth internal surface finishes meet or exceed Pharmacopoeia Class VI, FDA, USDA and 3A standards.

   

 

tskln1.jpg (17300 bytes)
TaskLine® Gaskets

Through a proprietary process, FDA-approved, pure virgin PTFE resin is compression molded around and through a 304-stainless steel, perforated metal insert. After oven sintering, every gasket undergoes a 15,000-volt spark test to check for pinholes. The porous-free PTFE resin 100% encapsulates the stainless insert, isolating it from any fluid contact while in service.

Task-Line® gaskets are molded to size, 1/2" through 24" in class 150# and 300# ANSI ratings with a thickness of 1/8" or 3/32", Installation is quick and simple. Task-Line® gaskets are self-aligning and seat easily to any flange in almost any condition.

   

 

ps-tube.jpg (25070 bytes)
PureSite Teflon sight gage

PureFlex's PureSite Teflon sight gage is the ultimate answer to all your sight gage needs. Unlike traditional clear PVC or flexible sight glass tubing, Teflon tubing will not absorb media and discolor over time. This feature alone makes the PureSite unmatched compared to any other sight gage material of construction.

Ideal for:

  • Visual inspection
  • Liquid level gage
  • Magnetic detection for metal particle monitoring
  • Dip tubes

Resistant to:

  • Chemical attack
  • Thermal shock
  • Shattering
  • Cracking
  • Stress
  • Aging
  • Ultraviolet light degradation

Industries:

  • Pharmaceutical
  • High purity
  • Ultra pure water
  • Food and beverage
  • chemical
  • Cryogenic

PureSite sight gages can be manufactured with a built-in gallonage tape, too!

ps-scale.jpg (16303 bytes)

Go to the Pureflex website

 

Copyright© 1997 Cortrol Process System, Inc. All rights reserved.

All brand names, trade names, copyrights, patents, are the property of their respective owners.
Teflon® is a registered trademark of E. I. Dupont Co.
Kynar® is a registered trademark of Elf Atochem North America, Inc.

Back